Download ACP panel catalogues, review test reports and find installation guidance for your product evaluation.
Technical documentation
Find the relevant test, check what it covers and open the original report.
| Test / Property | Standard / Method | What It Covers | Document |
|---|---|---|---|
| Fire Performance | |||
Surface Burning — ACP Panel Report issued byIntertek | ASTM E84-16 | Flame spread and smoke development of the tested aluminium composite panel. | View PDF |
| Surface Burning — FR CoreReport issued by Intertek | ASTM E84-16 | Flame spread and smoke development of the tested fire-retardant core material. | View PDF |
| Ignition PropertiesReport issued by Intertek | ASTM D1929-16 | Flash-ignition and spontaneous-ignition temperatures of the submitted 4 mm A2 ACP sample. | View PDF |
| Reaction to Fire — ACP PanelReport issued by Intertek | EN 13501-1:2007+A1:2009 | Reaction-to-fire classification of the tested ACP construction, using heat-of-combustion and single-burning-item tests. | View PDF |
Reaction to Fire — Mineral Core Report issued byExova | EN 13501-1:2007+A1:2009 | Exova classification report for the tested 3 mm A2 mineral core material. | View PDF |
Reaction to Fire — 4 mm FR Panel Report issued bySGS | EN 13501-1:2007+A1:2009 | Reaction-to-fire classification of the submitted 4 mm fire-retardant panel, with the mounting conditions specified in the report. | View PDF |
| Fire PropagationReport issued by Intertek | BS 476-6:1998+A1:2009 | Contribution to fire growth of the tested 4 mm fire-retardant ACP with its PVDF-coated face exposed. | View PDF |
| Surface Spread of FlameReport issued by Intertek | BS 476-7:1997 | Surface flame-spread classification of the tested 4 mm fire-retardant ACP. | View PDF |
| CombustibilityReport issued by SGS | AS 1530.1:1994 | Combustibility testing of the submitted panel construction: 0.5 mm aluminium skins and a 3 mm FR core. | View PDF |
| Bonding & Peel Strength | |||
| 180° Peel StrengthReport issued by Intertek | 180° peel method stated in report | Resistance to separation of the aluminium face skin from the tested composite panel. | View PDF |
| Climbing Drum Peel StrengthReport issued by SGS | ASTM D1781-98(2012) | Bond strength of the tested composite panel, measured by the climbing drum peel method and stated client requirements. | View PDF |
| Coating & Physical Properties | |||
| Coating & Panel PerformanceReport issued by SGS | Multiple ASTM / AAMA methods | Coating adhesion, thickness, abrasion, impact, salt spray, hardness and weathering; panel peel strength, shear strength and thermal conductivity. Tested sample: 4 mm ACP. | View PDF |
| Restricted Substances | |||
| RoHS Substance TestingReport issued by SGS | IEC 62321 methods / RoHS (EU) 2015/863 | Lead, mercury, cadmium, hexavalent chromium, PBBs, PBDEs and four phthalates in the submitted LDPE sample. | View PDF |
Each report applies to the sample, construction and test conditions stated in that document. Confirm the relevant report against your selected panel specification and project requirements.
Colours & Samples
Explore the available finish collections and request the relevant colour chart or a physical sample for approval. Screen and printed colours may differ from the finished coating.
Explore Finish CollectionsFabrication & Installation
Use the installation guide as a handling and fabrication reference. For factory cutting, routing, grooving or drilling, send your drawings so we can review the required processing. ALCADEX does not provide on-site installation.
View Installation GuideTalk to the ALCADEX team
Send your panel specifications, quantity and destination. Include drawings if factory processing is required.
