Traceable Procurement
For Grey 0.4mm-Skin FR ACP, confirming coating, skins, core and rating as one order helps purchasing teams match supplied panels to project documentation.
Grey Fire-Rated ACP Sheet with 0.4mm Skins
Grey 0.4mm-Skin FR ACP features a neutral grey PVDF finish for commercial façades, high-traffic public interiors and rigid fabricated cladding parts. The panel specification and factory processing can be confirmed around the finished component requirements.
- Panel thickness: 4mm or 5mm
- Standard size: 1220 × 2440mm (4 × 8 ft)
- Aluminium skins: 0.40mm front + 0.40mm rear
- Coating: PVDF coating
- Primary use: commercial façades, high-traffic public interiors and rigid fabricated cladding parts
What Is Grey Fire-Rated ACP Sheet with 0.4mm Skins?
Grey 0.4mm-Skin FR ACP uses two aluminium skins bonded to a mineral-filled fire-rated core and finished with a neutral grey PVDF finish. The available construction can be specified for B1 or A2 requirements, subject to confirmation of the exact panel build and applicable test documentation.
For Grey 0.4mm-Skin FR ACP, this product is supplied in 4mm or 5mm configurations for commercial façades, high-traffic public interiors and rigid fabricated cladding parts. Panel dimensions, aluminium skins, coating and fire classification must be ordered as one confirmed specification so the delivered material corresponds to the required documentation.
Product Data
Technical Specifications
| Item | Available specification |
|---|---|
| Panel thickness | 4mm or 5mm |
| Standard sheet size | 1220 × 2440mm (4 × 8 ft) |
| Available widths | 1000, 1250, 1500 and 1570mm |
| Available length | Up to 6000mm |
| Aluminium skin thickness | 0.40mm front + 0.40mm rear |
| Surface coating | PVDF coating |
| Core | Mineral-filled fire-rated core |
| Colour / finish | Neutral grey pvdf finish |
| Recommended use | commercial façades, high-traffic public interiors and rigid fabricated cladding parts |
| Factory processing | Cutting, sizing, routing, grooving and drilling to approved drawings |
Key Advantages
Grey 0.4mm-Skin FR ACP Benefits
Mineral-Filled Core
Grey 0.4mm-Skin FR ACP replaces a standard polyethylene core with a mineral-filled fire-rated core selected for the ordered classification.
B1 or A2 Configurations
For Grey 0.4mm-Skin FR ACP, the panel can be produced to a confirmed B1 or A2 specification when supported by the relevant build and test documentation.
Architectural Finish
For Grey 0.4mm-Skin FR ACP, its neutral grey PVDF finish provides the colour consistency required for visible wall, soffit and façade modules.
Multiple Panel Depths
Available thickness options allow Grey 0.4mm-Skin FR ACP to be coordinated with module size, fabrication geometry and handling needs.
Factory Processing
For Grey 0.4mm-Skin FR ACP, cutting, routing, grooving and drilling can be completed from approved drawings while maintaining the specified panel identity.
Where It Is Used
Typical Applications
Commercial Façade Panels
The 0.4mm aluminium skins provide a defined panel build for grey exterior cladding modules.
High-Traffic Interior Walls
Can be specified for selected public circulation panels where a more substantial aluminium skin is preferred.
Fabricated Cassettes
Supports routing and folding into grey cassette components produced from approved drawings.
Column and Service Covers
Provides a consistent neutral finish for architectural casings in commercial and public buildings.
Product Questions
Frequently Asked Questions
Which fire classifications are available for Grey 0.4mm-Skin FR ACP?
For Grey 0.4mm-Skin FR ACP, b1 and A2 configurations are available. The exact core, skins, coating and panel thickness must match the classification and supporting test documentation requested for the order.
What core is used in this fire-rated ACP?
For Grey 0.4mm-Skin FR ACP, a mineral-filled fire-rated core is bonded between the aluminium skins. Core composition and panel build vary according to the confirmed classification.
Is Grey 0.4mm-Skin FR ACP available with a PVDF surface?
For Grey 0.4mm-Skin FR ACP, yes. This product is specified with a neutral grey PVDF finish for visible architectural surfaces.
Can the fire-rated sheets be factory fabricated?
For Grey 0.4mm-Skin FR ACP, yes. Approved cutting, routing, grooving and drilling can be completed while keeping panel identification and order traceability.
What information is needed for a fire-rated quotation?
For Grey 0.4mm-Skin FR ACP, provide the required classification, test-document requirement, panel thickness, aluminium skins, coating, dimensions, quantity and processing drawings.
Request a Quote for Grey 0.4mm-Skin FR ACP
Send the required sheet or component dimensions, aluminium skin thickness, finish, quantity and processing drawings. Alcadex will review the specification and prepare a manufacturing quotation for Grey 0.4mm-Skin FR ACP.
