Controlled Surface Resistance
The special coating is specified to maintain an approximately 10⁶–10⁸Ω surface-resistance range under the confirmed test conditions.
4mm Double-Sided Anti-Static Aluminium Composite Panel
4mm Double-Sided Anti-Static ACP is manufactured for Anti-static wall panels, enclosures and fabricated components. The panel build and factory processing can be confirmed around the finished component requirements.
- Panel thickness: 4mm
- Standard size: 1220 × 2440mm (4 × 8 ft)
- Aluminium skins: 0.15mm front + 0.15mm rear
- Coating: Special anti-static paint coating on both aluminium skins
- Core: Polyethylene
What Is 4mm Double-Sided Anti-Static Aluminium Composite Panel?
The 4mm double-sided anti-static aluminium composite panel is built with 0.15mm front and rear aluminium skins, a polyethylene core and a special anti-static paint coating on both aluminium surfaces. The specified coating is used to control surface resistance within a target range of approximately 10⁶–10⁸Ω, subject to the confirmed coating specification and test method.
Applying the anti-static coating to both sides distinguishes this product from a conventional PVDF ACP, which normally has a decorative PVDF face and a standard service coating on the rear skin. The panel is intended for wall linings, enclosures and fabricated components where reduced static charge accumulation and lower electrostatic dust attraction are important material-selection criteria.
Product Data
Technical Specifications
| Item | Available specification |
|---|---|
| Panel thickness | 4mm |
| Standard sheet size | 1220 × 2440mm (4 × 8 ft) |
| Available widths | 1000mm, 1250mm, 1500mm and 1570mm |
| Available length | Up to 6000mm, subject to confirmed specification and transport requirements |
| Aluminium skin thickness | 0.15mm front + 0.15mm rear |
| Surface coating | Special anti-static paint coating on both aluminium skins |
| Core | Polyethylene |
| Colour / finish | Anti-static coated colour, subject to approved sample |
| Recommended use | Anti-static wall panels, enclosures and fabricated components |
| Factory processing | Cutting, sizing, routing, grooving and drilling to approved drawings |
| Target surface resistance | Approximately 10⁶–10⁸Ω, subject to confirmed coating specification and test method |
Key Advantages
4mm Double-Sided Anti-Static ACP Benefits
Double-Sided Anti-Static Coating
Both the face and rear aluminium skins receive the same anti-static paint system for consistent coating specification across the panel.
Reduced Static Accumulation
The coated surfaces help dissipate electrostatic charge instead of allowing charge to remain concentrated on a standard decorative face.
Lower Electrostatic Dust Attraction
Reducing surface charge can limit the electrostatic attraction of airborne dust to the coated panel surface in controlled interiors.
Light Composite Construction
Two aluminium skins and a bonded core provide a rigid 4mm sheet that remains easier to handle than comparable solid metal plate.
Factory Fabrication Options
The panel can be cut, routed, grooved and drilled for confirmed wall modules, covers and enclosure components.
Where It Is Used
Typical Applications
Controlled Interior Walls
Creates anti-static coated wall modules for areas where surface-charge control is part of the material specification.
Equipment Enclosures
Can be fabricated into casings and covers around sensitive production or technical equipment.
Data and Technical Rooms
Supports wall and service-zone panels in controlled rooms containing electronic and data-processing equipment.
Laboratory Fit-Out Components
Provides a clean, fabricated panel surface for selected partitions, cabinets and technical-room elements.
Product Questions
Frequently Asked Questions
What is the target surface resistance of this anti-static ACP?
The supplied coating is intended for an approximately 10⁶–10⁸Ω range. The final order should define the coating specification, measurement method and acceptance requirement.
How does it differ from standard PVDF ACP?
This product uses a special anti-static paint system on both aluminium skins, while standard PVDF ACP normally has a PVDF decorative face and an ordinary rear service coating.
Are both aluminium skins 0.15mm thick?
The standard build described here uses a 0.15mm front skin and a 0.15mm rear skin in a 4mm overall panel.
Can the panel be supplied with a fire-rated core?
A mineral-filled fire-rated core is available as a separate confirmed product build with its own rating and supporting documentation requirements.
Can anti-static panels be processed before shipment?
Yes. Alcadex can cut, size, route, groove and drill the sheets from approved component drawings.
Request a Quote for 4mm Double-Sided Anti-Static ACP
Send the required panel dimensions, quantity, aluminium skin thickness, target surface-resistance range and test method, core specification, and any processing drawings. Alcadex will review the confirmed build and prepare a manufacturing quotation for 4mm Double-Sided Anti-Static ACP.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.